Powder Coat Masking Tapes

Here is our high temperature masking tape for powder coating, which can be used in chemical, automotive, electronics and electrical industry. This type of masking tape is available in different sizes and different versions.

SP-510
0.100mm
0.025mm/0.036mm
0.050mm/0.075mm
0.190mm/0.125mm

Silicone adhesive with a rigid 0.100mm polyester
Resist chemical wash, heat treatment and removable without residue

Click here
   
RD-714
0.135mm
0.160mm

Reinforced polyester film coated with a silicone adhesive
Heat resistant up to 220°C
Minimal shrinkage
Yellow

Click here
 
SP-255
0.110mm

Crepe paper/silicone adhesive
Crepe paper based masking tape, ideal for irregular surfaces

Click here
   
SP-479

Version of PPI 255 with thicker adhesive layer
Good adhesion to irregular board surfaces
Supplied die-cut and with scored liner

Click here
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.
SP-510
0.100mm
0.025mm/0.036mm
0.050mm/0.075mm
0.190mm/0.125mm
masking tape for powder coating processes

Based on a 0.100mm thick polyester film coated with a layer of silicone adhesive its adhesive leaves no residue during removal from the coated substrate resists baking temperatures up to 200oC
SP-510 has been specifically designed as a masking tape for powder coating processes. Its adhesive leaves no residue during removal from the coated substrate. Resists baking temperatures up to 200oC.

Applications: 
bandoleering tape in the manufacture of hypodermic needles
removable masking tape for powder coating processes
RD-714
0.135mm
0.160mm
masking tape for powder coating processes

RD-714 has been specifically designed as a high temperature resistant, masking tape for powder coating processes. Its adhesive leaves no residue during removal from the coated substrate. Resists baking temperatures up to 220°C

Applications: 
removable masking tape for powder coating processes
SP-255
0.110mm
self-adhesive masking tape for hot air levelling and high temperature soldering processes

SP-255/SP-479 is a self-adhesive masking tape especially suitable for the protection of various areas of P.C. Boards (such as gold contacts) during high temperature flow solder processes. It is particularly recommended for masking edge connectors or fingers during hot air levelling.

Applications: 
SP-255/SP-479 can be removed from printed circuit boards after the soldering operation without any danger of adhesive residue.
When using SP-255/SP-479 as a mask in hot air levelling, the tape should be pressed onto the P.C.B. after application by means of rollers, preferable heated up to 100oC(212oF)
SP-479
self-adhesive masking tape for hot air levelling and high temperature soldering processes

SP-255/SP-479 is a self-adhesive masking tape especially suitable for the protection of various areas of P.C. Boards (such as gold contacts) during high temperature flow solder processes. It is particularly recommended for masking edge connectors or fingers during hot air levelling.

Applications: 
SP-255/SP-479 can be removed from printed circuit boards after the soldering operation without any danger of adhesive residue.
When using SP-255/SP-479 as a mask in hot air levelling, the tape should be pressed onto the P.C.B. after application by means of rollers, preferable heated up to 100oC(212oF)
Segment: 
airbaghsvchemicalautomotiveelectrotical insulationelectric