Low ESD tapes

SP-249D
0.025mm
Black Opaque

Anti-static polyester based tape
For use in production areas where a static free environment is required

Click here
   
SP-2155

Based on lightly metallised polyester film – unique construction with both anti-static adhesive and anti-static release surface

Click here
    
    
   
SP-2156

Version of SP-2155 but based on fully metallised polyester – taping of conductive transportation boxes - practically zero static development 

Click here
    
    
   
SP-249B
0.025mm
0.050mm

Anti-static polyester based tape suited to low outgassing applications

Click here
 
RD-512D
0.025mm

Translucent version of SP-249
Low static
Acrylic adhesive

Click here
   
RD-575
0.025mm

Low static masking tape
High temperature applications
Silicone adhesive

Click here
    
    
   
RD-707

Low tack version of RD-512D

Click here
 
RD-042D
0.025mm
0.050mm

Anti-static polyimide based tape with silicone adhesive

High temperature masking

Click here
   
RD-624
0.025mm

Anti-static Polyimide/ conductive acrylic adhesive.

Version of RD-042D with high temperature resistant acrylic adhesive.

Click here
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.
SP-249D
0.025mm
Black Opaque
low outgassing anti-static polyester-based adhesive tape

.

Applications: 
masking of printed circuit boards during conformal coating
SP-249B can be removed after conformal coating without leaving any adhesive residue.
For use in hard disk drive applications.
SP-2155
anti-static polyester based adhesive tape

based on lightly metallised (SP-2156 on fully metallised) polyester film coated with a special surface conductive adhesive on the unmetallised
side. This special construction ensures that static charge is readily dissipated during unwinding and application of the tape. The metallised backing helps to prevent generation of tribolelectric charges from surface friction during use of the tape.

Applications: 
Primarily used for taping conductive polypropylene hardcases used for the transportation and storage of die within static sensitive environments.
The adhesive exhibits specific adhesion to these cases ensuring that even after prolonged periods of time, no adhesive residue occurs on removal.
SP-2156
anti-static polyester based adhesive tape

based on lightly metallised (SP-2156 on fully metallised) polyester film coated with a special surface conductive adhesive on the unmetallised side. This special construction ensures that static charge is readily dissipated during unwinding and application of the tape. The metallised backing helps to prevent generation of tribolelectric charges from surface friction during use of the tape.

Applications: 
Primarily used for taping conductive polypropylene hardcases used for the transportation and storage of die within static sensitive environments.
The adhesive exhibits specific adhesion to these cases ensuring that even after prolonged periods of time, no adhesive residue occurs on removal.
SP-249B
0.025mm
0.050mm
low outgassing anti-static polyester-based adhesive tape

based on polyester film coated with a low outgassing surface conductive adhesive

Applications: 
masking of printed circuit boards during conformal coating
SP-249B can be removed after conformal coating without leaving any adhesive residue.
For use in hard disk drive applications.
RD-512D
0.025mm
anti-static polyester adhesive tape

A translucent, printable anti-static adhesive tape. The special static dissipative construction of RD-512D ensures that during tape unwind and removal of the tape from a variety of plastic substrates static charges of less than 20 volts are generated. RD-512D is resistant to high temperatures and many solvents and chemicals. The anti-static properties are unaffected by variations in humidity.

Applications: 
suitable for use in production areas where a static free environment is required e.g. printed circuit board assembly
sealing, repair and labelling of anti-static bags for circuit board and component packaging
mounting of electronic components and circuit boards during testing procedures
RD-575
0.025mm
anti-static polyester masking tape

A translucent, printable anti-static adhesive tape. The special static dissipative construction of RD-575 ensures that during tape unwind and removal of the tape from a variety of plastic substrates static charges of less than 20 volts are generated. RD-575 is resistant to high  emperatures and many solvents and chemicals. The anti-static properties are unaffected by variations in humidity.

Applications: 
anti-static masking tape for circuit boards and components during conformal coating and potting processes
suitable for use in production areas where a static free environment is required e.g. printed circuit board assembly
sealing, repair and labelling of anti-static bags for circuit board and component packaging
mounting of electronic components and circuit boards during testing procedures
RD-707
anti-static protective masking tape with low tack acrylic adhesive

A translucent, printable anti-static adhesive tape. The special static dissipative construction combined with the low tack adhesive of RD-707  nsures that during tape unwind and removal of the tape from a variety of plastic substrates static charges are virtually eliminated. The anti-static properties are unaffected by changes in humidity.

Applications: 
suitable for use in production areas where a static free environment is required
suitable for temporary protective masking of components or objects
RD-042D
0.025mm
0.050mm
anti-static printed circuit board and conformal coating masking tape

Based on polyimide film coated with a special surface conductive adhesive. Static generation during unwind and application is eliminated.
RD-042D can withstand wave soldering temperatures up to 300oCand leaves no adhesive residue on printed circuit boards during removal.

RD-624
0.025mm
anti-static printed circuit board and conformal coating masking tape

Based on polyimide film coated with a special surface conductive acrylic adhesive. Static generation during unwind and application is eliminated. RD-624 can withstand wavesoldering temperatures up to 300oC and leaves no adhesive residue on printed circuit boards during removal.

Segment: 
automotiveelectrotical insulationelectric